Classic Hand Tools Limited - Blue Spruce Toolworks


	VAT REDUCTION TO 15% Please note that some displayed prices may still refer to vat at 17.5%. This is only a textual reference. ALL prices are automatically calculated at 15% at the check out

Secure Online Shopping

Online Catalogue > Chisels & Mallets > Blue Spruce Toolworks - chisels

Blue Spruce Toolworks

Blue Spruce Toolworks precision hand tools are designed for the woodworking craftsman who desires tools as finely crafted as the furniture he makes. They are designed and produced by a woodworker and have a balance and feel that can only come with years of experience and attention to detail. Made in Oregon, USA and sold in the UK & Europe exclusively through Classic Hand Tools.

Dovetail chisels (including new larger sizes), Detail Skew Chisels, New Fishtail Chisels, New Long handled Paring Chisels. These are chisels that you will want to cherish and pass on to future generations. The tools are attractively boxed with a choice of beautiful handles: Cocobolo, African Blackwood, or Curly (figured) Maple (top tip - if choosing several different types of chisel it maybe a good idea to mix chisel handles as this makes it quicker to identify if they sit in a tool roll). Read more about timber selection...

Blue Spruce Toolworks Dovetail Chisels Ref: BST DC

These have been a fantastic addition to the range of chisels we offer at Classic Hand Tools since we introduced them into Europe in 2007.

The thin blade allows the chisels to get into tight areas e.g between tails in the area receiving small pins in dovetail joinery, or to clean up the sides of small or thin mortises.

The blades are A-2 tool steel, hardened and tempered to 60 Rc. They are precision ground, honed, and come ready to use.

The handles are finely turned with an attractive detail bead to add interest and a visual separation between the wood handle and brass ferrule. The handle is uniquely sized and has a more bulbous shape than most chisel handles for a wonderful feel and balance

Available widths: 1/8, 1/4, 3/8, 1/2, 5/8 & 3/4" (the 5/8 & 3/4" sizes were added in early 2008).
Now available as
Boxed set of 4 - 1/8, 1/4, 3/8, 1/2"
Set of 6 - all 6 sizes
New 2008 sizes - 5/8 & 3/4"(for the many customers who have already bought the set of 4).

Individual Chisels - due to difficulties in guaranteeing rapid supply we are not yet able to offer these chisels individually. We hope to do so in 2009.

Prices include VAT

Quantity:

Set of 4 - Cocobolo - £179.95
Set of 6 - Cocobolo - £292.10
New 2008 sizes 5/8" & 3/4" - Cocobolo - £114.77
Set of 4 - African Blackwood - £193.78
Set of 6 - African Blackwood - £310.50
New 2008 sizes 5/8" & 3/4" - African Blackwood - £120.29
Set of 4 - Figured Maple - £193.78
Set of 6 - Figured Maple - £310.50
New 2008 sizes 5/8" & 3/4" - Figured Maple - £120.29

Detail Skew Chisels Ref: BSTsk

Blue Spruce Toolworks have made a pair of 10mm (3/8") skew chisels to compliment the dovetail chisels. They are 3/8 inch wide to fit into tight spaces, and 4-3/8" long. The sides are concave, similar to the dovetail chisels, to allow maximum visibility of your work and to allow paring into acute angles. The blades are made from the same A-2 tool steel as the dovetail chisels and hardened to 60 Rc for superior edge retention and sharpness. These chisels are ideally suited to cleaning out the socket bottoms of half-blind dovetails. They will be a great addition to your collection of fine woodworking chisels. Attractively boxed.

Prices include VAT

Quantity:

Set of 2 Blue Spruce Toolworks 3/8" skew chisels - Cocobolo - £83.38
Set of 2 Blue Spruce Toolworks 3/8" skew chisels - African Blackwood - £89.70
Set of 2 Blue Spruce Toolworks 3/8" skew chisels - Curly Maple - £89.70

Blue Spruce Toolworks Fishtail Chisels Ref: BST FT

Blue Spruce Toolworks is excited to announce these new Fishtail dovetail paring chisels for 2008. These chisels 3/8" & 1/2" have many uses but are specifically designed to clean out the sockets of half-blind dovetails. The thin blades taper back from the edge at an 8:1 ratio to allow side clearance and easy access into the sockets. This is an excellent ratio for dovetails in most woods but especially hardwoods.

The edges are also machined concave to nearly a knife edge for maximum visibility and shaving clearance. The maximum length of socket is about 7/8 inches, which covers the majority of casework dovetail applications. For longer lengths of sockets you will want to use your Blue Spruce Toolworks skew chisels.

The 4.25" long A2 blade is hardened and tempered to 60 Rc and ground and honed at a 30 degree angle. Like all Blue Spruce Toolworks' chisels, it is beautifully machined and well balanced and sure to become a favourite. The chisel is available with cocobolo, African blackwood or curly (figured) maple handles.

Price includes VAT

Quantity:

3/8" Fishtail chisel - Cocobolo - £53.71
3/8" Fishtail chisel - African Blackwood - £56.12
3/8" Fishtail chisel - Curly Maple - £56.12
1/2" Fishtail chisel - Cocobolo - £54.97
1/2" Fishtail chisel - African Blackwood - £57.44
1/2" Fishtail chisel - Curly Maple - £57.44

Blue Spruce Toolworks Long Paring Chisels Ref: BST PC

Blue Spruce Toolworks is excited to announce a new line of long, thin-bladed paring chisels. Now in stock in the UK & Europe only through Classic Hand Tools.

Available as a set of 6 - 1/8, ¼, 3/8, ½, 5/8 and ¾" widths with the usual choice of handles.

Prices includes VAT

Quantity:

Set of 6 Cocobolo paring chisels - £342.70
Set of 6 African Blackwood paring chisels - £365.70
Set of 6 Figured Maple paring chisels - £365.70

Blue Spruce Toolworks Marking Tools

please Click Here for more great tools from Blue Spruce Toolworks.

Online Catalogue > Chisels & Mallets > Blue Spruce Toolworks - chisels