Classic Hand Tools Limited - Miller Dowel Mini Joinery Kits


	VAT REDUCTION TO 15% Please note that some displayed prices may still refer to vat at 17.5%. This is only a textual reference. ALL prices are automatically calculated at 15% at the check out

Secure Online Shopping

Online Catalogue > Dowel Plates & Miller Dowel > Miller Dowel Mini Joinery Kits

Miller Dowel 1X Joinery Kit Ref: MD1X

The 1X is primarily used for jointing ¾” thick wood.

The kits are supplied with birch dowels only. If you want cherry, oak or walnut dowels you will have to buy the drill bit seperately (sorry!)

Prices include VAT

>> FAQs

Quantity:

1X Miller Dowel Joinery Kit, MDB12D11-Kit £18.45
1X Miller TruFit Drill Bit, MDQD12D11 £13.75
BIRCH-40 Birch dowels, MDB12D11-40 £9.00
BIRCH-100 Birch dowels, MDB12D11-100 £18.75
CHERRY-40 Cherry dowels, MDC12D11-40 £12.00
CHERRY-100 Cherry dowels, MDC12D11-100 £26.50
OAK-40 Oak dowels, MDO12D11-40 £10.50
OAK-100 Oak dowels, MDO12D11-100 £22.00
WALNUT-40 Walnut dowels, MDW12D11-40 £13.75
WALNUT-100 Walnut dowels, MDW12D11-100 £28.50

Miller Dowel 2X Joinery Kit Ref: MD2X

The 2X is intended to be used in ¾” to 1 ¾” stock.

The kit is supplied with birch dowels only. If you want cherry, oak or walnut dowels you will have to buy the drill bit seperately (sorry!)

Prices include VAT

>>FAQs

Quantity:

2X Miller Dowel Joinery Kit, MDB15D14-KIT £22.95
2X Miller Dowel TruFit Drill Bit, MDQD15D14 Price £16.75
BIRCH-40 BIRCH dowels, MDB15D14-40 £10.50
BIRCH-100 BIRCH dowels, MDB15D14-100 £22.75
CHERRY-40 Cherry Dowels, MDC15D14-40 £15.00
CHERRY-100 Cherry dowels, MDC15D14-100 £32.50
OAK-40 Oak dowels, MDO15D14-40 £12.75
OAK-100 Oak dowels, MDO15D14-100 £28.00
WALNUT-40 Walnut Dowels, MDW15D14-40 £15.75
WALNUT-100 walnut dowels, MDW15D14-100 £35.75

Miller Dowel Mini X Joinery Kit Ref: MDXmini

THE MILLER DOWEL MINI X (1 5/8" dowel)

The Mini-X was designed for ½ board stock.

The MINI X is designed for joining in projects using thinner solid woods, plywood or laminate. Unlike other methods of wood joinery, the MINI X requires few tools and can be installed exactly where it is needed in any woodworking project - from the outside in.

The MINI X is ideal for use when making drawer boxes in a desk or chest, decorative boxes with exotic woods, birdhouses, picture frames & many more smaller projects.

The MINI X features the same patented step design as the other 1X and 2X Miller Dowels. The first section acts like a clamp to securely hold the first piece of wood to the second. The second section gives the joint shear strength while the remaining sections bond with the anchor piece to form a secure joint. The MINI X is as fast and easy to use as nails or screws, but you do not need to use plugs to cover the countersunk screw or nail.

The MINI X dowel is inserted 2/3rds of the way by hand before it ever encounters any resistance. This gives it better holding strength and makes it easier to tap in. The ribbed sections of the dowel provide several advantages to glue adhesion. The sections are not tapered so the glue surface remains intact through the entire length as they engage. Due to the ribs being horizontal, glue can't migrate onto the surface, nor is the glue skimmed off at the top or forced down to the bottom of the hole. Additionally the ribbed sections provide relief from hydraulic pressure, preventing a blowout of the joint.

Mini X Miller Dowel Joinery Kit - you get 100 birch dowels & a drill bit.

The kits are supplied with birch dowels only. If you want cherry, oak or walnut dowels you will have to buy the drill bit seperately (sorry!).

Prices include VAT

>> FAQs

Quantity:

CHERRY-100 Cherry Mini X Dowel, MDC8C6.5-100 £21.75
OAK-100 Oak Mini X Dowels, MDO8C6.5-100 £15.00
WALNUT-100 Walnut Mini X Dowels, Code - MDW8C6.5-100 £21.75
Mini X Miller Dowel Joinery Kit, MDB8C6.5-Kit £15.95
Mini X Miller TruFit Drill Bit, MDQ8C6.5 £9.25
BIRCH-100 Birch Mini X Dowels, MDB8C6.5-100 £13.25

Online Catalogue > Dowel Plates & Miller Dowel > Miller Dowel Mini Joinery Kits